When selecting the type of conveyor for clothes with automatic doors of the GARDEROBOT and the room for installing equipment, the following parameters should be taken into account:

1. If you plan to use GARDEROBOT to store the clothes of visitors, the conveyor is installed on a single level with the obligatory use of separators for slots. At the same time, the width of one storage place cannot be less than 96 mm; the standard and convenient width is 120 mm.
2. When installing GARDEROBOT for storing clothes of employees of the enterprise, one or multi-level wardrobe conveyors can be used. If storage is carried out in covers or boxes, the use of cell separators is not necessary, the width of the cells in this case cannot be less than 72 mm, the width of 96 or 120 mm is standard and convenient for use.
3. GARDEROBOT can also be used as an automated warehouse system for storing and issuing property, an automatic point for issuing clothes after dry cleaning. The width of the slot in this case cannot be less than 48 mm, the width of 96 mm and more is standard and convenient for use.
4. The width of the room for installing the coat check conveyor cannot be less than 1400 mm, the height is not less than 1750 mm. 220V power supply must be provided in the room, in most cases, household electrical outlets are sufficient, because the power consumption of GARDEROBOT is usually no more than 1.0-2.0 kW.
5. The room for the installation of automatic sliding doors of GARDEROBOT must have at least one doorway with dimensions of at least 690 (w) x 1900 (h) mm, the standard size of the opening is 785 (w) x 2055 (h) mm.

The room for the installation of automatic swing doors of the GARDEROBOT must have at least one opening with dimensions of at least 415 (w) x 1400 (h) mm.

When installing automatic sliding doors, it is desirable, and when using swing doors, a standard door in the room is required, which can be used to access the conveyor by the administrator or service personnel.

6. The front panels of the GARDEROBOT are painted in color in accordance with the color scheme of the room, the logos of the owner enterprise, special information and voice notifications can be placed on the screen.

GARDEROBOT consists of the following main parts:

1. Coat check conveyor consisting of:

— support posts supporting the guide along which the conveyor chain runs. The supporting metal structure is made of a profile pipe 50×50 and 60×60 mm;

— the drive unit consists of a guide with a bend of 180±°, a drive gear with a diameter of at least 700 (+/-10 mm), which drives the conveyor chain. The drive gear is made of steel with a thickness of not more than 5 mm;

— guides with a bend of 180±10° are designed to change direction;

— internal and external guides with bends of at least 90° are designed to change the direction of movement by 90° or more degrees;

— straight segments of the rail of different lengths are designed to connect the rails with bends and the drive unit;

— the conveyor chain, which is a bearing element, is intended for transporting things on hangers. The chain is made of stainless steel with a thickness of at least 1.0 mm. It has transport rollers with a diameter of at least 24 mm and not more than 35 mm in the vertical plane and 24 mm and not more than 35 mm in the horizontal plane. The number of rollers per 1 linear meter is at least 30 pieces;

— curtain-separator is made of non-fragile plastic, at least 7 mm thick, fastened to the conveyor chain using spring steel elements in the color of the conveyor metal structure;

— the motor responsible for the movement of the tape has a 3-phase connection, a rotation speed of not more than 1100 rpm, a power of 0.75 kW, with an efficiency of at least 80%. The kit comes with a frequency converter that ensures the operation of the motor-reducer from the AC mains with a voltage of 220/240V at a frequency of 50-60 Hz. The noise level of the engine is no more than 70 dB, the vibration from the engine is not transmitted to the floor. The maximum heat dissipation of the electric motor does not exceed 1560 Btu / h.

2. Automatic sliding doors for conveyor system:

2.1. Door parameters:

• Door type: fully automatic sliding door;
• number of sashes 1 piece — availability;
• the width of the «clean» opening — no more than 200 mm;
• the height of the “clean” opening is not less than 1100 mm;
• installation height of the upper edge of the «clean» passage — 1700 mm (by prior agreement with the customer);
• the size of the installed part in the opening:

— width — 765 mm (by prior agreement with the customer);

— height — 2043 mm (by prior agreement with the customer);

• opening size for installation:

— width — 785 mm (by prior agreement with the customer);

— height — 2055 mm (by prior agreement with the customer);

• maximum weight of the structure, not more than 80 kg;
• the filling of the sliding sash is tempered glass 8 mm thick.

2.2. Door drive technical data:

• Control of the presence of hands and objects in the doorway using an optical barrier;
• Door opening and closing control with visual and audio support;
• maximum opening/closing force 120 N;
• opening speed (program setting) 5 – 20 cm/s;
• closing speed (program setting) 5 – 20 cm/s;
• time delay in the open state in automatic mode 0.5 — 60 s (program setting);
• power consumption is not more than 180 W;
• degree of protection ip 20 — availability.

3. Automatic swing doors for the conveyor system:

3.1. Door parameters:

Door type: swing door;

• number of sashes 1 piece — availability;
• the width of the «clean» opening — no more than 200 mm;
• the height of the “clean” opening is not less than 1100 mm;
• installation height of the upper edge of the «clean» passage — 1700 mm (by prior agreement with the customer);
• the size of the installed part in the opening:

— width — 402 mm (by prior agreement with the customer);

— height — 1 354 mm (by prior agreement with the customer);

• opening size for installation:

— width — 415 mm (by prior agreement with the customer);

— height — 1,400 mm (by prior agreement with the customer);

• maximum weight of the structure, not more than 30 kg;
• the filling of the hinged sash is tempered glass 8 mm thick.

3.2. Door drive technical data:

• maximum opening/closing force 120 N;
• opening speed (program setting) 2 — 5 seconds;
• closing speed (program setting) 2 – 5 seconds;
• time delay in the open state in automatic mode 0.5 — 60 s (program setting);
• power consumption is not more than 230 W;
• degree of protection ip 20 — availability.

4. Control unit:

4.1. Controller based on Windows 10/11;

• touch screen for informing users, diagonal not less than 10 inches;
• audio accompaniment;
• control of the user’s actions with the hanger — taking the hanger out of the slot, returning the hanger with or without clothes, returning the hanger after using the cloakroom;
• providing several slots to one user to accommodate children’s things or clothes of accompanied persons;
• temporary or one-time access using a QR code issued to the user in an electronic invitation or at a security post;
• slot location tracking system for feeding slots along a short trajectory (encoder);
• operating modes:

— automatic;

— manual;

— emergency shutdown;

— setting the main parameters using the built-in display and web control;

• remote control via a web interface to perform administrative functions;
• notification of the administrator about the help from the user in the telegram chat, through the web interface;
• optional emergency opening or closing (using a battery);
• log buffering, reporting — availability.

4.2. One or more different user identification systems can be used in one GARDEROBOT, such as:

• a system for creating a slot identifier based on a face fixation controller FACE-Id;
• reversible dispensers of conveyor coat check tags or access cards;
• printers and barcode or QR code readers;
• EM-Marine, HID, Mifare, UHF RFID readers, biometric access controllers and others, including those interfaced with existing ACS systems.

5.Additional features:

It is possible to view statistical data through the remote access system using the WEB interface.

Statistics are formed in the current time, that is, the accumulation of data occurs immediately after using the cloakroom.

It is possible to make an unloading for any past period of time (day, week, month, year, selected period)

Statistics is uploaded to a table in xlsx format.